logo_bulletin.png

Bulletin of
Vitebsk State
Technological
University

ru gb

ISSN: 2306-1774 (Online)

ISSN: 2079-7958 (Print)

раб. тел.  +375 212 495338

 
 

 

Поиск по сайту

vakRB_sm.png

logo-eLibrary.jpg

DOAJ_logo.jpg

OAJI Vestnik of VSTU

plus2.png

kiberleninka_sm.png

readera.png

index_copernicus.jpg

Google_Scholar.png

issn_sm.jpg

 
 

Textile waste preparing for the production of nonwovens produced by the wet pressing process


UDC 677.026.4:677.08

Authors


 
 

abstract


The quality of nonwovens produced by wet pressing technology is determined by the properties of the fibrous waste. The defining feature is the length. The fibers are non-uniform in length. So they must be prepared for the recycling.

The parameters of the equipment for cutting of textile waste are determined. The length of cutting length depends on the speed rate of the material in the cutting area and the speed of rotation of the rotor. The optimum length of fibers should be between 1 and 6 mm, therefore, the recommended operating parameters of the cutting tool are: the value of the rotor in the sleeve gap 0,02—0,04 mm; rotor speed 1600—3000 min-1; flow rate 5—13 m/min.

Textile waste preparing for the production of nonwovens produced by the wet pressing process

 

keywords


Publisher's imprint


Zimina, Alena. Textile waste preparing for the production of nonwovens produced by the wet pressing process / Alena Zimina? Alexander Kogan, Valeriy Olshanskiy // Vestnik of Vitebsk State Technological University. ─ 2016. ─ Issue 2(31). ─ P. 47.