logo_bulletin.png

Bulletin of
Vitebsk State
Technological
University

ru gb

ISSN: 2306-1774 (Online)

ISSN: 2079-7958 (Print)

раб. тел.  +375 212 495338

 
 

 

Поиск по сайту

vakRB_sm.png

logo-eLibrary.jpg

DOAJ_logo.jpg

OAJI Vestnik of VSTU

plus2.png

kiberleninka_sm.png

readera.png

index_copernicus.jpg

Google_Scholar.png

issn_sm.jpg

 
 

Influence of 3D Printing Parameters on the Dimensional Accuracy of Printed Models


UDC 004.925.84 : 655.222.343

https://doi.org/10.24411/2079-7958-2018-13506

authors


 
 

abstract


The subject of research is the influence of different 3D printing parameters on accuracy and quality of the final product.

During the work test models were designed. They were printed for further analysis. Based on the measurements made, limitations on the ability to print small geometric elements of the model are revealed. The influence on the resulting products accuracy of the following parameters of the 3D printer software has been studied: the print quality mode setting; the fill density setting; adjustment of the extrusion ratio.

The data obtained can be used for details printing to control their quality and accuracy. The results of the work will be used to develop an application for preparing a 3D model for printing.

Influence of 3D Printing Parameters on the Dimensional Accuracy of Printed Models

keywords


Publisher’s imprint


Savitski, Vasili Influence of 3D Printing Parameters on the Dimensional Accuracy of Printed Models / Vasili Savitski,  Aliaksei Holubeu, Dzianis Bykouski // Vestnik of Vitebsk State Technological University. ─ 2018. ─ № 2(35). ─ P. 52. DOI:10.24411/2079-7958-2018-13506

Accepted to publication on december 5, 2018