vest_logo_eng.png

Vestnik of
Vitebsk State
Technological
University

ru gb

ISSN: 2306-1774 (Online)

ISSN: 2079-7958 (Print)

раб. тел.  +375 212 495338

 
 

 

Поиск по сайту

vakRB_sm.png

logo-eLibrary.jpg

DOAJ_logo.jpg

OAJI Vestnik of VSTU

plus2.png

kiberleninka_sm.png

readera.png

index_copernicus.jpg

Google_Scholar.png

 

Flag Counter

Development of the simulation model of the combing process


УДК 677.21.021.186+677.21.051.186

Авторы


abstract


The simulation computer program that allows defining and optimizing the working setting param­eters of combing machines for cotton processing is developed. The algorithm of the program does not depend on the kind of processed fibers and the type of combing machine. By simulating the following pa­rameters are taken into account: fiber length and lin­ear density, irregularity of these parameters, working settings of combing machine. The program allows to consider the possibility of breakage and slippage of fibers during combing process for compliance with the results of simulation to the actual of fibers length distribution. The adequacy of developed model is proved on the basis of analysis of the experimental results that were obtained in spinning mill.

Development of the simulation model of the combing process

keywords


Выходные данные


Рыклин Д.Б., Разработка имитационной модели процесса гребнечесания/ Д.Б. Рыклин, О.М. Катович // Вестник Витебского государственного технологического университета . ─ 2013. ─ № 25. ─ С. 50.